| Material | Product is made from OXFORD 600D fabric which is water repellent, abrasion, does not change its properties at sub-zero temperatures. |
| Standarts | EN ISO 20471 III EN 343 3 2 EN 342 3 |
| Density | 210gsm |
| Packing | 1/10 |
- Product is made from OXFORD 600D fabric which is water repellent, abrasion, does not change its properties at sub-zero temperatures.
- Special membrane of fabric is moisture-proof, at the same time does not impairing air permeability from the inside. Fabric does not allow to shrink and fade, increased UV resistance, thereby increasing the using date of the product.
- Good visibility cold-resistant jacket with high adjustable collar and removable lined hood.
- Hood width is adjustable with elastic ripcords and height – with Velcro tape closure which lets to use hoodie with a helmet too.
- Padded back area and raised collar provides additional comfort.
- Fasten with high quality two-way zipper which is hidden under a flap which is attached with Velcro fastening in 3 places, and the top and bottom and additional metal stamp. The main zipper flap with reflective cord row. Additional zipper guard at the chin.
- The high quality inner lining of the main part, soft lint-free 200g/m2 fleece. The remainder of the lining is made from 100% polyester, labeled with branded “CannyGo” logos.
- In the chest area in the outside on both sides there are zippered flaps and additionally coated two capacious pockets. In the both sides under the flap there is the D-ring-shaped plastic loop suitable for ID card. In the jacket waist area there are two capacious side pockets with zippers. All jacket pockets are made from pocket fleece fabric.
- During the jacket shoulders, waist and bottom there are high-quality 60 mm reflective bands. In the bottom of the sleeve runs two parallel 60 mm reflector tapes.
- In the cuffs at the ends of the inner side – additional knitted cuffs, sparing heat.
- With an elastic cords there is a possibility to adjust jacket bottom width.
- Jackets back is lengthened, which provides additional comfort and protection from the cold. Jacket and cuffs bottom are made from black material.
- On the left side of the jacket there is internal zippered capacious pocket.
- Inside jacket, on the back side there is fastener-release location for comfortably put the logo.
- All seams are glued.
Reviews
There are no reviews yet.